Paver Cleaning And Resealing Cost In Cape Coral 2026 Pricing

Pavers are supposed to make a home feel "finished." Then Cape Coral weather steps in. Humidity, pool splash-out, lawn overspray, and summer rain can turn a sharp driveway or pool deck into a blotchy, slippery mess.

Here's the bottom line for paver resealing cost in Cape Coral in 2026: most homeowners land somewhere between a basic clean and seal and a full restoration, and the gap between those two can be thousands. The difference is almost always prep work, joint sand, and how picky the contractor is about drying conditions.

This guide breaks down realistic 2026 cost ranges, what should be in your quote, and when DIY makes sense.

In 2026, paver cleaning and resealing in Cape Coral commonly falls in the $0.75 to $4.00 per square foot range. That's a wide spread on purpose because pavers don't age evenly. A shaded pool deck with algae and failing joints is a very different job than a sunny patio that just looks dusty.

Most homeowners pricing "standard" work, meaning solid cleaning, fresh joint sand, and a quality sealer, often see $1.25 to $3.00 per square foot as a practical budgeting range in SW Florida.

Here are 2026 estimates by size, using that common range:

A few quick pricing realities in Cape Coral:

Smaller jobs can cost more per square foot because set-up, masking, and travel still take time. On the other hand, big open areas often get a better rate, as long as the pavers are in decent shape.

Also, "cheap" numbers usually mean something got skipped. Many problems show up later as peeling sealer, white haze, or weeds popping right back through the joints.

A good quote reads like a plan, not a mystery. It should also match what your pavers actually need. If you're seeing algae slicks, joint gaps, or sunken spots, expect a fuller scope. For a deeper look at local wear patterns, this guide on common paver problems in Cape Coral helps you spot what's cosmetic versus structural.

Many contractors use a surface cleaner with controlled pressure to lift grime without carving lines into the pavers. Soft washing often comes into play for algae, mildew, and heavy organic staining, especially around pool decks and shaded areas.

Ask what's being used and why. High pressure can damage joint sand and even etch some surfaces if the tech rushes.

This is where quotes can look similar but perform very differently.

A full-service bid usually includes blowing out failed sand and refilling joints. Some crews use polymeric sand, others use stabilized joint sand products designed to lock in. Either way, you want tight, filled joints before sealing, because open joints invite weeds, ants, and shifting.

If a quote says "seal only," clarify whether it includes any joint sanding at all. Sealing over empty joints is like painting a fence with missing boards.

Expect stain treatment to be a line item when you have:

• Oil and tire stains on driveways
• Rust stains near irrigation heads or metal furniture
• White haze (often mineral related)

Spot treatments add cost, but they can be worth it if curb appeal matters.

Most homeowners choose between a natural look and a wet look (color enhancing). Pool decks may need extra attention to slip resistance. Ask what brand or sealer type the contractor uses, how many coats they apply, and what cure time they require.

Warranties vary, so get it in writing. Also ask what voids it, for example, rain during cure, harsh cleaners, or pool chemicals left to dry on the surface.

DIY paver cleaning sounds simple, and sometimes it is. Still, the "savings" can disappear fast if you damage joints or seal on the wrong day.

If you already own a decent pressure washer, your DIY cost may be mostly materials:

Cleaner, joint sand, and sealer can still run a few hundred dollars, and more if you need multiple gallons for 1,000 to 2,000 square feet. Renting a surface cleaner, buying sprayers, and adding crack or stain products pushes the total higher.

Cape Coral conditions punish shortcuts:

Sealing before the pavers are truly dry can trap moisture. That's how you get hazing, whitening, or peeling. Over-applying sealer is another common mistake. Thick coats can stay tacky and track, especially near lanais and front entries.

Pressure mistakes matter too. One careless pass can blast out joint sand or leave "zebra stripes" on the surface.

Hiring a pro costs more, but you're paying for control: the right tips, the right pressure, clean edges, and a crew that can spot failures before they seal them in.

If your project ties into a driveway apron, a walkway replacement, or slab work, coordinating with a concrete company can also save headaches. This overview of professional concrete installation in Cape Coral is helpful if your hardscape plan includes both pavers and concrete.

Dry season usually gives the best results. In SW Florida, that's often October through May , when rain is less frequent and humidity is lower.

February is a great month for sealing because surfaces dry faster and sudden storms are less likely to interrupt curing. That matters because most sealers need a clear window to bond correctly. Summer can still work, but you'll need tighter scheduling, more monitoring, and sometimes longer dry times.

A smart approach is to pair paver work with other landscaping upgrades so the site stays clean. For example, if you're planning artifical turf near a pool deck or side yard, do the pavers first. Sand and wash water can stain or clog turf edges. This local cost guide on artificial turf installation costs Cape Coral can help you plan the sequence and the budget.

Many homes do well on a 2 to 3-year cycle, but pool decks and busy driveways may need attention sooner. Sun, traffic, and drainage decide the schedule.

Often yes, but not always. Some companies quote sealing as a separate step. Confirm whether paver cleaning includes surface cleaning, algae treatment, and joint prep.

Common exclusions include stain removal, lifting and re-leveling sunken pavers, replacing broken pavers, and drainage fixes. Ask for optional line items so you can compare apples to apples.

Not always. It can work well, but joint width, drainage, and installation quality matter. The best choice depends on your specific pavers and exposure.

Get 2 to 3 local quotes , and ask each one to list: cleaning method, joint sanding plan, sealer type and finish, number of coats, and cure time requirements.

Cape Coral pavers can look brand new again, but only if the prep matches the problem. Use the 2026 ranges to set expectations, then judge bids by what's included, not just the bottom line. When you compare quotes carefully and schedule during dry weather, your paver resealing cost is more predictable, and the results last longer.